bakugan-amazon-5fa251dca220a

  • SSR-25AA Solid State Relay AC to AC (Input 80-250V AC Output 24-380V AC) with Heat Sink, 25A
    Model: SSR-25AA, single phase Solid State Relay 25A AC to AC control, UL Approved, CE Compliant to EN60950-1 Input voltage 80-250V AC, Load voltage 24-380V AC, Max load current 25 Amp Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability
  • Twidec/Output Single Phase SSR Solid State Relay 25A 3-32V DC to 24-480V AC SSR-25DA
    Product name : solid state relay; Model No.: SSR-25DA;If you want to reach 25A, you need to add a large heat sink and fan Current : 25A;Frequency : 50/60Hz; output Voltage : 24-480vac;Special attention:This relay cannot be used for more than 10A for a long time.If that actual use current exceeds 15A,It is necessary to separately configure the heat sink. Control Voltage : 3-32vdc; mounting hole diameter : 4.5Mm/0.18" Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t); material : metal, plastic, electronic parts Net weight : 80G; Package Content : 1 x solid state relay
  • TWTADE SSR-25AA 25A AC 80-250V to AC 24V-380V Ac to Ac SSR Solid State Relay + Heat Sink
    Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25AA Solid State Relay 25A AC to AC Input: 80-250V AC Load: 24-380V AC Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19" Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ) Package Content: 1 x SSR, 1 x heat sink
  • SSR-25AA Solid State Relay with Heat Sink AC to AC Input 80-250V AC Output 24-380V AC Max Current 25A (SSR-25AA)
    SSR-25AA Solid State Relay with aluminum heat radiator and heat conductive silica gel Input: AC 80-250V, Load: AC 24-380V max current 40A When load current is greater than 10A,so recommended to use Radiator This product comes with radiator and heat conducting silica gel,make the usage more safe and convenient Package include: 1x Solid State Relay 1x heat sink 1x silica gel sheet
  • Discontinued - NO Direct Replacement, Recommend PSC-121000A-C Powersonic PSC-12800A-C Sealed Lead Acid Battery Charger - Automatic Switchover 12 Volt/0.8 Amp Nominal
  • WerFamily SSR Solid State Relay SSR-25AA AC-AC 70-280V AC / 24-480V AC / 25A
    Product name: Single Phrase Solid State Relay; Model: WF-ASH-A-AA-25AA Control Mode: AC to AC; Control Voltage: 70 - 280VAC; Output Voltage: 24-480VAC Relay size: 57.4 x 44.8 x 28mm/2.26 x 1.76 x 1.1inch (L*W*H) Sealed high temperature resistance housing. Transparent resin protective cap is included. Output requirements concatenated fuse or and the varistor. 10 to 25A radiator cooling,more than 25A must on the radiator and fan cooling.
  • Twidec/ 25A Single Phase SSR Solid State Relay Input DC 4-32V Output AC 24-480V For Machinery Control TH-25DA
    Product name : solid state relay;Model type:TH-25DA;Special attention:If that actual use current exceeds 15A,It is necessary to separately configure the heat sink. Current : 25A,Note: This refers to the long-term actual load 25A (other general relays can only have a long-term load within 10A) Control Voltage : 4-32vdc;Output Voltage : 24-480vac;Mounting hole diameter : 4.5mm/0.18";Mounting hole center distance:45mm/1.8" Total size (approximate) : 61 x 45 x 29Mm/2.4" x 1.8" x 1.1" (l*w*t); material : metal, plastic, electronic parts Net weight : 80G; Package Content : 1 x solid state relay
  • YXQ SSR-25AA Solid State Relay AC 80-250V Input AC 24-380V Output Small AC Exchange Type Electronic Controller
    Solid State Relay (25AA SSR ) Output 24-380VAC Input 80-250VAC SSR with The flame-retardant plastic housing, epoxy casting compound, wiring screw terminals with high structural strength, High reliability, electromagnetic compatibility and longer life With Insulated cooling plate, Effectively cooling for solid state relays, Long-term use can also be safe and stable Pure copper terminal block, excellent electrical conductivity, no heat for a long time SSR with Diode indicator, mainly used for solid state relay power indicator, low power consumption
  • Corcom 20EP1 RFI Power Line Filter 20A 120/250VAC 50-60Hz
    Corcom 20EP1 RFI Power Line Filter 20A 120/250VAC 50-60Hz
  • AC Adapter Power Supply for Radio Shack PRO-92 PRO-94B Receiver Scanner, 5 Feet, with LED Indicator
    Compatible with: Radio Shack PRO-92 PRO-94B Receiver Scanner Replacement only, not original, but 100% compatible …. Brand New, High Quality Replacement AC Wall Power Supply Adapter Charger with LED light. Input : 100V - 240V worldwide, All Products are CE Certified Intelligent Switching circuit will recognize a full battery & automatically switches to a save mode Plug never heats or overcharges the battery, Short circuit protection Please don't confuse us with the low quality / low current ones in the market.

[rate]
This site uses cookies: Accept / Deny