bakugan-cards-5fa251e6a120a

  • Acme Electric T279742S Low Voltage Distribution Transformer, Single Phase, 120/208/240/277 Primary Volts - 120/240 Secondary Volts, 2 kVA
    Quite operation with sound levels below nema standards Electrostatic shield for enhanced protection Construction type: encapsulated Mounting type: wall Wiring diagram: 23
  • Siemens MT0075A Industrial Power Transformer, Domestic, 240 X 480, 230 X 460, 220 X 440 Primary Volts 50/60Hz, 120/115/110 Secondary Volts, 75VA Rating
    Reduces 240 x 480, 230 x 460, or 220 x 440 V (primary voltage) to 120/115/110 V (secondary voltage) Rated up to 75 VA Silicon steel-laminated core and copper magnet wire for increased transformer efficiency Epoxy-encapsulated to resist moisture, dust, and industrial contaminants Built-in fuse clips on secondary side save panel space and wiring time because they do not have to be manually installed in the field
  • Acme Electric T279740S Low Voltage Distribution Transformer, Single Phase, 120/208/240/277 Primary Volts - 120/240 Secondary Volts, 1 kVA
    Quite operation with sound levels below nema standards Electrostatic shield for enhanced protection Construction type: encapsulated Mounting type: wall Wiring diagram: 23
  • Acme Electric T253012S Low Voltage Distribution Transformer, Single Phase, 240 x 480 Primary Volts - 120/240 Secondary Volts, 2 kVA
    Quite operation with sound levels below nema standards Electrostatic shield for enhanced protection Construction type: encapsulated Mounting type: wall Wiring diagram: 2
  • SSR-25AA Solid State Relay AC to AC (Input 80-250V AC Output 24-380V AC) with Heat Sink, 25A
    Model: SSR-25AA, single phase Solid State Relay 25A AC to AC control, UL Approved, CE Compliant to EN60950-1 Input voltage 80-250V AC, Load voltage 24-380V AC, Max load current 25 Amp Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability
  • Siemens MT0050F Industrial Power Transformer, Domestic, 208/277 Primary Volts 50/60Hz, 120 Secondary Volts, 50VA Rating
    Reduces 208/277 V (primary voltage) to 120 V (secondary voltage) Rated up to 50 VA Silicon steel-laminated core and copper magnet wire for increased transformer efficiency Epoxy-encapsulated to resist moisture, dust, and industrial contaminants Built-in fuse clips on secondary side save panel space and wiring time because they do not have to be manually installed in the field
  • ORION FANS OA172SAP-11-1TBXC 172X150X51MM, 0.35/0.40A, 110-125VAC, Dual Ball Bearing, AC Fan
    0.35/0.40A 110-125VAC 172X150X51MM AC FAN DUAL BALL BEARING
  • Honeywell AT150F1022 Circuit Breaker Transformer, 50VA,120V, 208V, 240V
    Package Dimensions: 8.128 cms (L) x 10.668 cms (W) x 13.208 cms (H) Product Type: Bearings And Bushings Package Quantity: 1 Country Of Origin: United States
  • PC740-2C-C3-120A | DPDT 120 AC Coil 40 Amp 250 VAC UL Rated, 2 Pole Ice Cube Power Relay with Top Flange
    40 Amp 120 VAC, 40 Amp 250 VAC, 40 Amp 28 VDC 1.5 HP 120 VAC UL Rated -25 to +55C Operating Temperature with Top Flange 120 VAC / 5.5 VA Coil, AC Coils Up To 240 V or DC Coils Up To 110 V
  • for TONON TD1225LS 12025 12V 0.18A 12CM 12012025mm Cooling Fan
    model: TD1225LS Used to replace the inverter CPU fan industrial cooling fan Replace damaged parts and damaged parts Made in China Quality 100%
This site uses cookies: Accept / Deny